Making and receiving calls in ContactPad

How do I make an outbound call?

Making an outbound call using ContactPad occurs in two stages:

1. Vonage Contact Center dials your phone, and your state changes to Busy Outbound. You must answer this call.
2. When you answer the call, Vonage Contact Center dials the number you provide.

To make an outbound call, perform the following steps:

1. In ContactPad, click Make Call. Your state changes automatically to Ready for Outbound. In this state you are temporarily removed from any of the inbound queues you serve, giving you time to look up the contact number you wish to dial or read through your notes to prepare for your outbound call.

2. A new dialog box with the address book appears. For information about the address book and what it contains, see ContactPad address book.
   You can only consult with an agent who is in Available now or Interruptible status. For more information, see Extended agent presence (calls) in ContactPad.
   
   Perform one of the following steps to find the VCC agent, agent group, interaction plan, short code, or other type of contact, you want to call:

   • Scroll down the list of agent, queue, service names, and agent groups using the arrow keys or mouse. Press Return, or click the name, to select the appropriate name.
   • In the Search field, to filter the list, type part or all of the name of the agent you want to consult. Use the arrow keys or mouse to scroll down the filtered list to the agent. If the name is unique, it is selected automatically. Press Return, or click, to select the appropriate name.

   • In the Search field, type the telephone number of the person you want to consult.

     A No matches found message appears when you type a telephone number. Ignore this message when consulting a telephone number.

   • In the Search field, to filter the list to include agent groups only, type '@' followed by part or all of the name of the group. Use the arrow keys or mouse to scroll down the filtered list to the group. Press Return, or click, to select group and display agent names from that group. 
     

     Typing '@' in the Search field removes everything other than groups in the list.

   Optionally, in Callback number, select the callback number you want to present to the contact. For information about callback numbers, see Callback numbers.

3. Press Return or click Dial.
   Your telephone rings, and when you answer you hear ringing until you are connected to the target number.

Outbound call failures

When you make an outbound call, you might see receive error messages in the ContactPad message panel. These messages help you understand why calls have failed, so you can try another number, or arrange a later callback.

You can receive one of these three error messages:

• Unable to place call to agent. Please try again This error occurs if your line is already in use, your line has a fault, or your telephone number is incorrect.

  Important

  Your supervisor should be able to identify any causes. If the above error messages persist you may have a problem with your phone and you should contact your supervisor to diagnose.

• Unable to place call to dialled number. Please try again This error occurs if you have provided an invalid number. Check the number you want to dial, ensuring that you provide the correct national or international code.
• Unable to place call - dialled number did not answer This error occurs if no one answers the phone after a configurable length of time—between 15 seconds and 3 minutes.

If messages persist, report a fault on your phone line to your Supervisor.

How do I answer an inbound call?

When you receive a call through the ContactPad you can make use of Vonage Contact Center's call control features; you can put the call on hold, consult with someone else, transfer the caller elsewhere or even control the call recordings.

When you receive an inbound call, the following things happen:

• your state automatically changes to Busy Inbound
• the call control buttons—Release, Hold, and Consult—become active
• the Pause button becomes available (if this feature is enabled for your account)

• details of the inbound call appear in the information panel
  

  Internal call

  By default, if the inbound call is an internal call from another agent in your account, the agent's name will appear in the information panel.

  

• your phone starts to ring

If enabled for your account and in your browser, a web notification also appears. For more information, see Call notifications.

If you answer your phone, you are connected to the caller. If you cannot accept the call right now, you can reject it. For information about rejecting a call, see the How do I reject an incoming call? section later in this page.

You can now perform one of the following tasks:

• end the call. For information about ending a call, see How do I end an inbound call? later in this page.
• put the caller on hold. Click Hold to put the caller on hold. The caller hears on-hold music or beeps and the Hold button changes to a Retrieve button. Click Retrieve to speak with the caller again.
• consult with a third party—another agent, number, short code, queue or interaction plan—about this call, and, optionally, transfer the call to that third party. For information about consulting with a third party, see How do I consult with and, optionally, transfer to a third party? later in this page.

How do I reject an inbound call?

Before you are connected to a call, you can reject it. To reject a call when you receive an inbound call, click Release in ContactPad. The inbound call is then returned to the queue and routed to the next available agent.

After rejecting an inbound call your state automatically goes into No Answer.

How do I consult with and, optionally, transfer to a third party?

While on a call, you can consult with another agent or someone on another number about the call. If you have the Consult to Queue feature enabled for your account, you can also consult with a queue or interaction plan. More specifically, you consult with an available agent servicing the queue or interaction plan. For information about the Consult to Queue feature, see Consult to Queue. During consultation you can choose to transfer the call to the consulted agent, number, short code, queue, or interaction plan.

To consult with a third party about your current call, perform the following steps:

1. Click Consult. A new dialog box with the address book appears. For information about the address book and what it contains, see ContactPad address book.
   You can only consult with an agent who is in Available now or Interruptible status. For more information, see Extended agent presence (calls) in ContactPad.
   
   Perform one of the following steps to find the VCC agent, agent group, interaction plan, short code, or other type of contact, you want to call:

   • Scroll down the list of agent, queue, service names, and agent groups using the arrow keys or mouse. Press Return, or click the name, to select the appropriate name.
   • In the Search field, to filter the list, type part or all of the name of the agent you want to consult. Use the arrow keys or mouse to scroll down the filtered list to the agent. If the name is unique, it is selected automatically. Press Return, or click, to select the appropriate name.

   • In the Search field, type the telephone number of the person you want to consult.

     A No matches found message appears when you type a telephone number. Ignore this message when consulting a telephone number.

   • In the Search field, to filter the list to include agent groups only, type '@' followed by part or all of the name of the group. Use the arrow keys or mouse to scroll down the filtered list to the group. Press Return, or click, to select group and display agent names from that group. 
     

     Typing '@' in the Search field removes everything other than groups in the list.

   Optionally, in Callback number, select the callback number you want to present to the contact. For information about callback numbers, see Callback numbers.

2. Press Return or click Dial:
   

   • If you selected an agent or another number you will hear ringing until you are connected or until the consult times out.

     The timeout for consulting with another agent or telephone number is configurable in System Settings. For information about configuring the timeout, see Editing Configuration (Account Settings).

     Your caller hears on-hold music until you return to or transfer the call.

   • If you selected a queue or interaction plan and have the Consult to Queue feature enabled, the original caller is put on hold and hears on-hold music. You—the agent—wait for another agent to answer your call. For more information, see Consult to Queue. While waiting, you can click Alternate to switch between the queue and the original caller.

   • If you selected a queue or interaction plan and do not have the Consult to Queue feature enabled for your account then the original call is transferred immediately to the selected queue or interaction plan.

3. When you are connected to the target agent or telephone number, or agent servicing the queue or interaction plan, the active call control buttons change.
   Release, Alternate, and Transfer—become active.

   • To end the consult connection, click Release. The active call control buttons change again. Retrieve and Consult—become active.
     • To reconnect with the caller, click Retrieve. You are connected to the caller.
     • To consult another agent or number, or to transfer the call to a queue or interaction plan, click Consult. Go to step 1.
   • To transfer the caller to the consulted agent or number, click Transfer or hang up your telephone. The call is transferred and your state changes to Call Transferred for 5 seconds.
     When you complete a Transfer, your state automatically changes to the Wrap Up state of Call Transferred. 

     Information

     The default timeout for the Call Transferred state is five seconds. Contact Vonage if you need to change this timeout.

   • To alternate between the caller and the consulted agent or number, click Alternate. You can alternate as many times as you require.

     If you hang up your telephone without releasing the consult connection, your caller is transferred to the consulted number.

How do I add another party to an existing call (conference call)?

While on a call, if enabled for your account, you can add another participant to the call, for example another agent.

To add a third party to an existing call, perform the following steps:

1. Click Consult to call the person you want to add to the conference (the consulted agent).

   For information about consulting with a third party, see How do I consult with and, optionally, transfer to a third party? earlier in this page. When you are connected to the target number or agent, in addition to the usual buttons, the Conference button appears in ContactPad.

   

2. Click Conference. All three parties can now hear each other.
3. You can now perform one of the following tasks:

   • Disconnect the consulted agent and return to a two-way call with your customer. Click Release.

     The same occurs if the consulted agent clicks Release in their ContactPad or hangs up their phone.

   • Connect the consulted agent and the customer, and leave the call. Click Transfer or hang up your phone. The consulted agent now controls the call as described.

     If the customer hangs up, you and the consulted agent remain in a two-way call.

How do I end a call?

At the end of a call, you can end the call in one of three ways:

• You, the agent, can click Release in ContactPad
• You, the agent, can hang up
• The caller can hang up

Following each call, your state is automatically changed to the Wrap up (Auto) state. This state takes you offline allowing you time to complete any activities for the call before your next call arrives.

Following Wrap up (Auto) your state changes back to Ready or Ready for Outbound automatically. Whether you change to Ready or Ready for Outbound is determined by your supervisor. If your call center generally receives more inbound calls than makes outbound calls, the default ready state is likely to be Ready. If your call center makes more outbound calls than receives inbound calls, the default ready state is likely to be Ready for Outbound.

Click Ready at any time while in the Wrap Up state, ideally as soon as you are ready to take another call. Changing your state back to Ready as soon as possible helps your call center to answer more calls, and helps you to reduce your overall wrap up statistics.